The Apple II line of computers supported a number of Apple II peripheral cards, expansion cards which plugged into slots on the motherboard, and added to and extended the functionality of the base system.
The Apple II employs what's called a geographic addressing. That is each expansion slot gets a fixed address (range) reserved and assigned for local resources. Thus the address of a component (like a VIA) changes, depending on which slot is used. Geographic addressing is the most simple form of plug and play while retaining the ability to have.
All Apple II models except the Apple IIc had at least seven 50-pin expansion slots, labeled Slots 1 though 7. These slots could hold printed circuit board cards with double-sided edge connectors, 25 'fingers' on each side, with 100 mil (0.1 inch) spacing between centers. Slot 3 in an Apple IIe that has an 80-column card fitted (which is usually the case) and Slots 1 through 6 in a normally configured Apple IIgs are 'virtually' filled with on-board devices which means that the physical slots cannot be used at all, or only with certain specific cards, unless the conflicting 'virtual' device is disabled.
- All Apple II models except the Apple IIc had at least seven 50-pin expansion slots, labeled Slots 1 though 7. These slots could hold printed circuit board cards with double-sided edge connectors, 25 'fingers' on each side, with 100 mil (0.1 inch) spacing between centers.
- 51 rows Expansion Slot Connector for the Apple II Series Interface/Add On Cards Connector.
In addition to the seven standard expansion slots, the following computers contained additional, largely special-purpose expansion slots:
- Apple II and Apple II Plus: Slot 0 (50-pin, for the firmware card or the 16 kB Apple II Language Card)
- Apple IIe: Auxiliary Slot (60-pin; primarily for 80-column display and memory expansion)
- Apple IIgs: Memory Expansion Slot (40-pin)
Perhaps the most common cards found on early Apple II systems were the Disk II Controller Card, which allowed users of earlier Apple IIs to use the Apple Disk II, a 5¼ inch, 140 kB floppy disk drive; and the Apple 16K Language Card, which increased the base memory of late-model Apple II and standard Apple II Plus units from 48 kB to 64 kB.
Both Apple, and dozens of third-party vendors created hundreds of cards for the Apple II series of computers. These expansion slots afforded great opportunities for expansion. In the 2000s, long after the last Apple IIe came off Apple's assembly line in 1993, a handful of manufacturers continue to market peripherals and expansion cards for Apple II computers, not counting students, hobbyists, and other Apple II users who continue to push the original machine to its limits.[citation needed]
- 1Categories
- 2External links
Categories
The Apple II line of computers supported a number of Apple II peripheral cards, expansion cards which plugged into slots on the motherboard, and added to and extended the functionality of the base system.
All Apple II models except the Apple IIc had at least seven 50-pin expansion slots, labeled Slots 1 though 7. These slots could hold printed circuit board cards with double-sided edge connectors, 25 'fingers' on each side, with 100 mil (0.1 inch) spacing between centers. Slot 3 in an Apple IIe that has an 80-column card fitted (which is usually the case) and Slots 1 through 6 in a normally configured Apple IIgs are 'virtually' filled with on-board devices which means that the physical slots cannot be used at all, or only with certain specific cards, unless the conflicting 'virtual' device is disabled.
In addition to the seven standard expansion slots, the following computers contained additional, largely special-purpose expansion slots:
- Apple II and Apple II Plus: Slot 0 (50-pin, for the firmware card or the 16 kB Apple II Language Card)
- Apple IIe: Auxiliary Slot (60-pin; primarily for 80-column display and memory expansion)
- Apple IIgs: Memory Expansion Slot (40-pin)
Perhaps the most common cards found on early Apple II systems were the Disk II Controller Card, which allowed users of earlier Apple IIs to use the Apple Disk II, a 5¼ inch, 140 kB floppy disk drive; and the Apple 16K Language Card, which increased the base memory of late-model Apple II and standard Apple II Plus units from 48 kB to 64 kB.
Both Apple, and dozens of third-party vendors created hundreds of cards for the Apple II series of computers. These expansion slots afforded great opportunities for expansion. In the 2000s, long after the last Apple IIe came off Apple's assembly line in 1993, a handful of manufacturers continue to market peripherals and expansion cards for Apple II computers, not counting students, hobbyists, and other Apple II users who continue to push the original machine to its limits.[citation needed]
- 1Categories
- 2External links
Categories[edit]
Apple II cards can be broadly divided into the following categories:
50-pin standard slots[edit]
- Serial cards (RS-232 serial interface)
- Parallel cards (Centronics/IEEE 1284 parallel interface)
- Multifunction I/O cards
- Internal modems
- 80 column (or more) text cards (e.g., Videx)
- PAL Color graphics cards (required for color graphics in early European Apples)
- RGB cards
- Floppy disk controllers
- Hard disk controllers
- Network adapters
- Memory expansion cards
- Miscellaneous cards
Other slot types[edit]
- Slot 0 card (Firmware Card, Language Card)
- Apple IIc internal expansion cards
- Apple IIgs memory expansion cards (40-pin IIgs slot type)
- Apple IIgs accelerators
- Apple IIe auxiliary cards (60-pin auxiliary slot; 80-column cards, RGB, memory expansion)
External links[edit]
About cards[edit]
- Marc Ressl and Antoine Vignau. 'The Apple II Documentation Project'. Retrieved 2013-04-13. Datasheets, manuals, ROM and disk images, schematics, sound files, photos, and product advertisements related to Apple II computers and peripherals.
- Phil Beesley (16 October 2005). '8 bit Apple II Expansion'. Archived from the original on 18 August 2010. Retrieved 2010-01-31.
- 'Cartes d'extension APPLE II'. Hack Z Apple (in French). Retrieved 2010-01-31.
- Dave Touvell (2006). 'Hardware'. Apple2Info.Net. Archived from the original on 2009-05-15. Retrieved 2010-01-31.
- 'Peripheral Card connector pinout'. Retrieved 2010-01-31.
- 'Apple II Online Reference'. Retrieved 2010-01-31.
- Tony Diaz. 'The Power ][ be your Best'. Archived from the original on 19 February 2010. Retrieved 2010-01-31.
- Steven Weyhrich. 'Apple II History'. Retrieved 2010-01-31.
Manufacturers[edit]
Apple Ii Expansion Slot Pinout 2
- ReactiveMicro.com — Hard drive controllers, GS-RAM card, Mockingboard clone, replacement power supplies, No-Slot Clock, MicroDrive, TransWarp GS 32KB Cache Board, other TransWarp GS upgrades
- R & D Automation — CFFA Compact Flash, IDE interface card
- A2 Retrosystems — Uther Ethernet card
- SVD — Semi Virtual Diskette, solid-state 5¼' disk emulator
- 8 Bit Baby — prototyping board
- RC Systems — DoubleTalk (Echo and Slotbuster compatible) speech synthesizer card
Comments are closed.